Surveillance Camera ROVISION 5MP outdoor IP 3.6mm fixed lens, metal housing, 100M IR POE power supply, motion detection

Professional video surveillance camera IP technology for outdoor ROVISION, 5MP resolution, fixed lens 3.6mm, 100M visibility at night, POE power supply, motion detection

The Rovision video surveillance camera, IP transmission, offers quality images during the day and night with the help of 5MP resolution and night visibility of up to 100M. Equipped with a 1 / 2.5 ″ PS5510 PIXART CMOS sensor that gives you a clear and quality image, it manages to capture images even in low light conditions.
The metal case adds to the camera because it offers double protection against the weather.
The 5MP resolution and the increased visibility at night recommend the camera for outdoor use, for the surveillance of parking lots, commercial spaces and for the surveillance of the perimeter of the house.
Compared to other IP cameras, the CRISIP-HB4A-5.0ST model benefits from an intelligent function that allows the detection of people in the viewing angle of the camera, thus differentiating between humans and animals or birds.

Thanks to the integrated PoE technology, the transmission of power and data via a single cable (wiring and installation costs are reduced);
The camera can be mounted at a distance of at least 100 m (with the appropriate cables). Another advantage of the POE function is increased safety and reliability.

Poe comes from Power over Ethernet. It is the ability of a switch to power the cameras on the same network cable. That is, you do not have to power the camera separately. You can do it on a single network wire.

Power over Ethernet allows the installation of equipment remotely or through external sources without the need to connect to an AC power source. This allows power supply in several areas without the need to install additional electrical infrastructure or have power outlets. Equipment can be installed without the need for an electrician and because the Ethernet cable costs less and is often already installed in buildings, PoE-based systems are much more cost-effective and efficient.
It is necessary for this camera to be connected to a POE NVR system if you want to give up the camera power supply. If the NVR is not POE, the cameras must be powered by a 12V source. It is purchased separately depending on the number of camera and the distance at which they are mounted.