Specifications
| Producer | EZVIZ |
| Communication type | ZigBee 3.0 |
| Distance communication | 200m (in open field) |
| Detection angle | 90 horizontal, 90 vertical |
| Installation height | 1.8 ~ 2.5 m wall installation |
| Battery | 1x CR2450 (included) lifetime up to 2 years |
| PIR detection | Passive infrared (PIR), detection distance up to 7 meters |
| Box contents | – T1C PIR Sensor – Animal Shield – Double Sided Tape – Regulatory Information – Quick Start Guide |
| Operating temperature | -10 to +55 C |
| Installation mode | wall/ceiling, magnetic support, 360 adjustable installation |
| Size | 43.5 × 32 mm |
Description
- Find out when there is activity at home
Get an immediate notification when someone enters your room. The new T1C motion sensor from EZVIZ uses passive infrared (PIR) technology to detect human movements and can send alerts directly to your smartphone. The T1C sensor connects to the gateway at home EZVIZ and is small enough to fit on any wall or corner, for an easy DIY security solution. - It fits anywhere to cover every corner
Install the PIR sensor wherever you need protection and rotate it 360 degrees to find the best detection angle. You can also fine-tune detection coverage using the animal shield
to partially cover the sensor, so that it alerts you only in case of human activities, and not every time your pet runs around the room. - Easy integration with your smart home
Connect the sensor to the home access gate and connect it with the EZVIZ camera for increased protection — all through the EZVIZ app. If you use a local storage card or have subscribed to EZVIZ CloudPlay, the camera can start recording automatically for 5 seconds whenever the sensor detects an activity. - A product that you can set and forget
The drag-and-paste installation allows you to easily find the best configuration for your home. The battery included in the sensor can provide up to 2 years of power when the power saving mode is activated - Anti-vandalism alarm for additional protection
For even more peace of mind, the sensor immediately warns you when someone forcibly removes the cover. - Expand the EZVIZ alarm system
The PIR sensor can be conveniently added to the EZVIZ alarm system for extended protection. You will be notified of any detected activity, all through the EZVIZ application
Documents and manuals
| Technical specifications RO_CS-T1C (PIR Sensor) | |
| Installation manual (RO) CS-T1C (PIR Sensor) |
RJ45 CAT6 jack
Proximity tag with EM4100 chip (125KHz) CST-EM125-B
Power supply father, 12V, screw
MAMA power plug with screw
Plug RJ45 CAT5 UTP network pass through connector
Manson Crimp connectors RED - CAP SYSTEM
Joint coupling the PVC tube type I D20 - DLX
BNC connector for screw mounting surveillance cameras 201801013032
Male power plug
Dubluizolat two-wire supply cable 100% copper roll MYYUP 100m 2x0.75mm
Manson Crimp connectors YELLOW - HEAD SYSTEM
Support clamp for PVC tube D20 - DLX
RJ45 CAT5
Male power plug with screw
Cable extension adapter connector BNC Female to BNC Female
Support clamp for PVC tube D16 - DLX
CAT5 shielded UTP network plug 8 RJ45 contacts
Power connector mother, 12V, screw
Modular plugs grounded shockproof - DLX
The surveillance camera Dahua HAC-T3A21-VF-2712, Dome, 2MP sensor 1 / 2.7, IR 20m
IP camera Colorhunter series 4MP, White light 30m, Audio, Alarm, double lens, PoE, IP 67, IK10 - UNV IPC2K24SE-ADF40KMC-WL-I0
Dahua IPC-HFW2449T-AS-IL-0360B Bullet IP AI WizSense Smart Dual Light Surveillance Camera 4MP, 1/2.9 CMOS, 3.6mm, IR 60m/50m, microphone, PoE, IP67
Manson Crimp connectors BLUE - CAP SYSTEM
PIR Detector Digital Quad Zone Logic interior - OPTEX
Monitor Dahua VTH5221DW-S2 video intercom, 7 LCD, 1024x600 resolution, SD slot, Wi-Fi, PoE
Dahua surveillance accessories Power supply PFM320D-015. 12V / 1.5A






