Specifications
| Producer | EZVIZ |
| Communication type | ZigBee 3.0 |
| Distance communication | 200m (in open field) |
| Detection angle | 90 horizontal, 90 vertical |
| Installation height | 1.8 ~ 2.5 m wall installation |
| Battery | 1x CR2450 (included) lifetime up to 2 years |
| PIR detection | Passive infrared (PIR), detection distance up to 7 meters |
| Box contents | – T1C PIR Sensor – Animal Shield – Double Sided Tape – Regulatory Information – Quick Start Guide |
| Operating temperature | -10 to +55 C |
| Installation mode | wall/ceiling, magnetic support, 360 adjustable installation |
| Size | 43.5 × 32 mm |
Description
- Find out when there is activity at home
Get an immediate notification when someone enters your room. The new T1C motion sensor from EZVIZ uses passive infrared (PIR) technology to detect human movements and can send alerts directly to your smartphone. The T1C sensor connects to the gateway at home EZVIZ and is small enough to fit on any wall or corner, for an easy DIY security solution. - It fits anywhere to cover every corner
Install the PIR sensor wherever you need protection and rotate it 360 degrees to find the best detection angle. You can also fine-tune detection coverage using the animal shield
to partially cover the sensor, so that it alerts you only in case of human activities, and not every time your pet runs around the room. - Easy integration with your smart home
Connect the sensor to the home access gate and connect it with the EZVIZ camera for increased protection — all through the EZVIZ app. If you use a local storage card or have subscribed to EZVIZ CloudPlay, the camera can start recording automatically for 5 seconds whenever the sensor detects an activity. - A product that you can set and forget
The drag-and-paste installation allows you to easily find the best configuration for your home. The battery included in the sensor can provide up to 2 years of power when the power saving mode is activated - Anti-vandalism alarm for additional protection
For even more peace of mind, the sensor immediately warns you when someone forcibly removes the cover. - Expand the EZVIZ alarm system
The PIR sensor can be conveniently added to the EZVIZ alarm system for extended protection. You will be notified of any detected activity, all through the EZVIZ application
Documents and manuals
| Technical specifications RO_CS-T1C (PIR Sensor) | |
| Installation manual (RO) CS-T1C (PIR Sensor) |
Manson Crimp connectors BLUE - CAP SYSTEM
Encapsulated transformer, 45VA
Dahua VTM127 Intercom Accessory Mounting Box
MAMA power plug with screw
Manson Crimp connectors YELLOW - HEAD SYSTEM
Metal cable organizer, 1U, 12 out - ASYTECH Networking ASY-CM-12
L support profile for floor racks depth 800 mm - ASYTECH Networking ASY-LR-475
Apparently NC magnetic contact (brown)
Cable extension adapter connector BNC Female to BNC Female
Dahua VTO4202F-MN Intercom Accessory Blank Module
Manson Crimp connectors GREEN - CAP SYSTEM
Automatic lighting for hallways or stairwells - ELECTRA API.11A
Router 1 x 2.5Gbit, 7 x Gigabit, 1 x SFP+, RouterOS L5 - MikroTik RB5009UG+S+IN
Buried magnetic contact, NC (brown)
Connector-Network plug UTP RJ45 (Mother)-UTP RJ45 (Mother) CAT 5 - Cable extension adapter Patch Cord
13.56MHz Access Card, iClass SEOS 8KB HID-5006
BNC plug connector for coaxial cable RG6 surveillance cameras jack F
Power plug wire mother
Support clamp for PVC tube D25 - DLX
Support clamp for PVC tube D16 - DLX
Manson Crimp connectors RED - CAP SYSTEM
Video intercom protection, wall mount - UNV EP-CS201
Dahua VTM125 Intercom Accessory Mounting Frame
Proximity tag with EM4100 chip (125KHz) CST-EM125-B
Support ceiling PIR detector - OPTEX







